Pühler Intelligent offers a brand-new, compact homogenizing disperser that ensures the reproducibility of product quality in online systems. Here, the dispersion system operates in a vacuum-sealed environment, thus eliminating dust contamination and product loss.

The InNovaZ TRL-C dispersion pump operates in a closed-loop circulation mode, where bagged powder materials can be fed via a suction gun or a feeding station. Alternatively, materials can be fed through bulk bags or silo mode.

The InNovaZ TRL-C dispersion pump operates similarly to a feed pump. Through optimized flow control, the process tank generates a negative pressure during operation, which draws in the powder. By combining appropriate powder conveying devices, the introduction of external air can be minimized as much as possible.

Here, the wet process is not based on the traditional rotor-stator principle; it achieves dispersion through high shear rates. The principle of InNovaZ TRL-C is based on the ability to continuously provide a large liquid surface when adsorbing powder under negative pressure. Due to the pressure gradient between the supply and delivery ends, the liquid is pressed into the agglomerates, allowing individual solid particles to be almost ideally wetted within a very short time. Because of the low shear rate, the input energy is significantly reduced compared to traditional rotor-stator systems, which means excellent product temperature control can be achieved.

Scattered quality
Sustainable product quality
Through the inhalation of powder, there is a high dispersion capability.
Very small temperature input

Simple operation and cleaning
With small process grooves, cleaning is effortless.
Quick product batch change
Simple and reliable operation.

No dust and no product loss.
The sealed processing space makes it possible to achieve cleaner production.
Adhesion and scaling caused by dust-free conditions in the process groove.

The process is reliable.
1. The software can rule out operational errors.
2. Allow the presence of small foreign objects
3. The servo motor is custom-integrated, with the motor directly connected to the rotor. The traditional extended shaft is eliminated, resulting in smoother rotor operation and a longer lifespan.
4. Servo motor design, **no-load speed up to 8000 r/min**, **no-load linear speed reaches 58 m/s**.
5. Anti-clogging device, which prevents damp materials from blocking the feed inlet and affecting the feeding speed.
6. Pressure detection, enabling real-time monitoring of the operating status of the working chamber.
7. Multi-impeller design: Multiple impellers are designed for powder and liquid feeding as well as vacuum, resulting in better powder suction and discharge performance.

Application Areas:

Biotechnology, batteries, ceramics, nano applications, digital inks, digital inkjet & additive manufacturing, paints, pigments/dyes, printing inks, research & development/education.