This company's hand-cranked manual disperser is suitable for scenarios with small usage, infrequent operation, and low material viscosity.

Here is the English translation of "相关介绍": **Related Introduction**

Manual Dispersion MachineStructural Features:
...hand-crankedManual Dispersion MachineThe lifting structure is suitable for small-batch production (similar to electric lifting dispersers), and compared to electric lifting dispersers, it eliminates the need for electric lifting.Changing part of the lifting mechanism to a hand-chain type reduces usage costs. If lifting is not frequent, it is more cost-effective to use.
...When manually raising and lowering, it is relatively more labor-intensive compared to electric lifting. If frequent adjustments are needed, the difference between the two becomes quite noticeable.
...Manual Dispersion MachineThe structure is slightly different from that of an electric disperser. The electric disperser does not require consideration of counterweight, whereas the hand-cranked type...Manual Dispersion MachineThe electric screw is omitted.Part of the structure is cantilevered to make manual operation easier, to balance the weight on both sides, and to prevent the center of gravity from shifting forward and exerting force on the guide column.The hand-cranked typeManual Dispersion MachineStructural improvement and upgrade (a counterweight unit of the same weight as the motor is built into the column, making the weights on both sides relatively guided).(columns remain parallel);
...The electrical configuration is identical to that of the electric disperser, both adopting fully explosion-proof components, prioritizing safety above all else.
...hand-crankedManual Dispersion MachineThe lifting part uses linear bearings to make hand-cranking easier.
...During the operation of this machine, care must be taken to protect the guide column and the guide linear bearing parts to avoid issues such as bending or jamming that may affect lifting.
...The standard practice for this machine does not include a dispersion tank (also known as a mixing tank or pull tank).
...Due to structural limitations, the power of this unit is **5.5KW**.
...When making a selection, a viscosity reference value for the relevant material must be provided. If the viscosity is too high, this structure is not recommended.Manual Disperser

Technical Parameters Table for Hand-Operated Manual Dispersion Machine:

The above special specifications can be customized!