• Can be crushedVery small sampleHigh recycling volume

• Easy to assemble and disassemble (within minutes), to facilitate the crushing of small batches and highly mixed samples

• According to the specifications of the ceramic liner and glove box, **crushing** can be performed.

• Compact design, ideal for use in testing chambers.(Standard specification dimensions: 540 x 270 x 650H)

• A crushing method that uses compressed air to discharge energy, which is the *finest crushing achievable by a dry wall crusher.

• It generates almost no heat during crushing, making it an ideal choice for crushing low-melting-point and heat-sensitive materials.

• It can also be pulverized using inert gases (N₂, Ar).Effectively prevent oxidation and ignition during crushing.

Crushing Principle

• The sample supplied to the crusher is being
  In the ultra-high-speed vortex of compressed air directed to the crushing zone, particles collide with each other, are crushed, and are discharged from the crushing nozzle.

• The finely crushed powder is guided by the rotating upward airflow within the mill to the classification zone, where only the fine powder remains.
  Pass.The unground coarse powder is re-ground in the crushing zone along with the downward airflow.

• The particle size of the crushed product is controlled by the pressure of the compressed air and the feed rate of the sample.

Standard Specifications