The experimental stirred mill equipment is designed for crushing, grinding, dispersing, and emulsifying powders of metals, non-metals, organic materials, and Chinese herbal medicines. It is particularly suitable for laboratory research. Its working principle involves the high-speed tumbling of abrasives and test materials within the grinding jar, generating strong shear, impact, and compression forces on the material to achieve the goals of crushing, grinding, dispersing, and emulsifying. It effectively meets various process parameter requirements and simulates production indicators. Additionally, due to its advantages of small batch size, low power consumption, and low cost, it is an **ideal device** for schools, research institutions, and companies conducting research on crushing processes, new materials, and coatings.

One,Main Technical Parameters of the Product

II. Product Usage Instructions

a) Rotate the grinding cylinder seat locking handle counterclockwise.2-3circle, rotate the grinding cylinder and its base horizontally to the appropriate position;

b) Load the grinding media into the ball mill cylinder, with the volume of the balls accounting for approximately the effective volume of the cylinder.60%Below;

c) Check that the bottom discharge valve is closed, then slowly add the prepared material into the ball mill jar containing the balls. The total volume should account for approximately the effective volume of the mill jar.70%Below;

d) Rotate the grinding cylinder and its base horizontally to directly below the stirring head (ensuring the stirring head is aligned with the center of the grinding cylinder). Tighten the locking handle of the grinding cylinder base to secure the grinding cylinder and its base in place, then install and lock the rod.

e) Press the run switch and gently jog the motor to check for any jamming or abnormal sounds. If any issues are found, promptly inspect and resolve them.

f) Start up and run the machine, then perform ball milling and crushing according to the process.

III. Precautions andProductionProduct maintenance

1. Precautions

a.Please install it on a three-phase power supply with an air protection switch, and keep the circuit dry to prevent leakage.

b.Please check the circuit wiring to ensure the motor rotates forward during operation.

c. During operation, ensure the frame, motor, grinding cylinder, and stirring rod are securely fastened; install them in the correct position, and ensure there is no jamming or collision during operation.

d. When loading a ball mill, the volume should not exceed the effective volume of the grinding cylinder.50~60%When the ball loading density is too high, the ball loading rate should be reduced.

e. The motor should be kept dry to avoid short circuits and burnout. The motor load should not be excessive. This machine is suitable for use with corundum, glass, and zirconia grinding media. If using high-density steel balls, the amount added should be reduced according to the situation.