Graphite XSG-10 Rotary Flash Dryer

XSG-10 Rotary Flash Dryer, with an evaporation capacity of 350 kg/h, initial moisture content of 33%, final moisture content requirement of less than 0.5%, and a specific gravity of 0.5 g/cm³. It uses an indirect coal-fired hot air furnace as the heat source and adopts a two-stage collection method of cyclone separator + bag filter for material collection. The parts in contact with the material are made of SUS304 stainless steel.

Characteristics of a Graphite Rotary Flash Dryer with an Evaporation Capacity of 350 kg/h

1. A variety of feeding devices are available for selection, ensuring continuous and stable feeding without bridging.

2. A special cooling device is installed at the bottom of the dryer to prevent material deterioration in the high-temperature zone at the bottom.

3. Special pneumatic sealing device and bearing cooling device effectively extend the service life of the transmission components.

4. A special air distribution device reduces equipment resistance while balancing the wind speed inside the tower.

5. The drying chamber is equipped with a classification ring and swirl blades, allowing the material fineness and final moisture content to be adjustable and controllable.

6. The high circumferential air velocity in the drying chamber and the short material residence time effectively prevent material adhesion to the walls and deterioration of heat-sensitive materials.