Lithium Iron Phosphate PLG-1500×12 Layer Disc Vacuum Dryer

Material Parameters:

1. Material Name: Lithium Iron Phosphate;

2. Moisture content before drying: approximately 0.2%; (free water)

3. Moisture content after drying: approximately 0.05%; (free water)

4. Drying temperature: 150-220℃;

5. Heat source temperature: thermal oil, oil temperature 200-220°C;

6. Output: 2000kg/12h;

7. Discharge method: Discharge from the bottom of the drying main unit.

8. Dust removal method: sintered mesh filtration (1000 mesh or above); equipped with nitrogen backflushing device.

9. Vacuum degree: -0.06~-0.08MPa;

(III) Technical Parameters of PLG-1500×12-Layer Disc Vacuum Dryer:

1. Drying area: 13.4㎡;

2. Number of drying discs: 10 layers;

3. Cooling area: 2.7㎡;

4. Number of cooling layers: 2 layers

5. Layer spacing: 220mm;

6. Diameter of the large disc: 1.5m;

7. Small disc diameter: 1.2m;

8. Host height: ~4.7m;

10. Spindle speed: 0-7 rpm, variable frequency speed regulation, motor model: YB4KW-6 pole

11. The transmission mechanism is equipped with overload protection, controlled by the frequency converter.

12. Temperature: Digital automatic control

**Engineering Case Studies**Hunan Dahua New Energy Co., Ltd., Hunan Jiafei New Energy Co., Ltd., Hunan Xiangyu New Materials Co., Ltd., Guangdong Hongda New Materials Co., Ltd., Hangzhou Longwei New Energy Co., Ltd., Zhejiang Dongyang Dongci, Xinxiang Chuangjia Battery Materials Co., Ltd., Tianjin Stellan Energy Technology Co., Ltd.