1800x1500 Drum Scraper Flaker Machine

1800x1500 Drum Scraper Flaker MachineIt is an internal heating conduction-type rotary drying equipment, where wet material on the outer wall of the drum receives heat transferred through conduction, removing moisture to achieve the required moisture content. Heat is transferred from the inner wall of the drum to the outer wall, then passes through the material film, resulting in high thermal efficiency and continuous operation. Therefore, it is widely used for drying liquid or strip materials, and is especially suitable for paste-like and viscous materials. It can be divided into two types: single-drum and double-drum dryers. Additionally, it can be classified into atmospheric and reduced-pressure types based on operating pressure.

The requirements for the flaking machine are as follows (1800*1500): 1. Feed temperature: 60℃

2. Discharge temperature: 30℃

3. Crystallization point: 48°C

4. Output: >150kg/h

6. Bulk density of dry product: ~1080 kg/m³

7. Stickiness: Yes

8. Cooling water inlet temperature: 20°C

Cooling water outlet temperature: 25℃

9. Cooling water pressure: 0.3MPa

10. Cooling method: Cold water

11. Equipment Material: 304 for material contact parts, A3 for others

1 12. Feeding method: Bottom feeding

1 13. Crystallization method: Drum scraper crystallization

14. Power supply: 380V/50HZ

15. Installation: Indoor