- Products
-
Shops
AI Search
The MICRACUT series can cut most materials, such as brittle or tough metals, hard or soft metals, composites, ceramics, rocks, biomaterials, laminates, and more. They are designed to cut all types of materials while minimizing structural deformation, preserving the structural integrity of the sample through the design and operation of MICRACUT. Additionally, low kerf loss and versatility in sample holding make MICRACUT an essential component of modern laboratories. The cut surface can be polished and examined under a microscope in a very short time.
| Model/Model number | Micracut 152 |
|---|---|
| Cutting capacity, Ø (mm) | 50 |
| Disk Diameter (mm) | 150 |
| Cutting method | Self-weight feeding |
| Power, (Watt) | 100 |
| Speed, (rpm) | 0-1000 |
| Dimensions: W+(mic.) x D x H (cm) | 51 x 43 x 34 |
| Weight (kgs) | 28 |
| Number | Micracut 202 |
|---|---|
| Disk Diameter (mm) | 200 |
| Cutting capacity, Ø (mm) | 75 |
| Cutting capacity, # (mm) | 50x175 |
| x-axis positioning range, (mm) | 60 (optional) |
| y-axis positioning range, (mm) | 210 |
| Z-axis positioning range, (mm) | 45 |
| T-slot table dimensions, mm (WxD) | 196 x 190 |
| T-slot dimensions, mm | 12 |
| Cutting power kW (S1) | 1.1 kW |
| Variable wheel speed, rpm | 300 – 4000 |
| Motor drive system | Direct drive |
| Laser | Optional |
| Worktable feed rate, (µm/s) | 20 - 1500 |
| Trimming during cutting operation | Optional |
| Human-Machine Interface Touchscreen (inches) | 7 |
| Cooling device, (lt) | 9 lt (Integrated) |
| Fast Pulse Cutting | Need |
| Thin slice grinding characteristics | Need |
| Dimensions, WxDxH, (mm) | 738 x 750 x 636 |
| Weight (kg) | 150 |
