Carbon black is a type of carbon black.Amorphous carbonIt is a light, loose, and extremely fine black powder with a very large surface area, ranging from 10 to 3000 m².2/g, is a solid residue produced by the incomplete combustion of carbon-containing materials (such as coal,Natural gas、Heavy oilProducts obtained from the incomplete combustion or thermal decomposition of substances such as fuel oil under conditions of insufficient air. Those made from natural gas are called "gas black," and those made fromOilThe resulting substance is called "lamp black," which is made fromacetyleneThe product is called "acetylene black." Additionally, there are "channel black" and "furnace black." Based on the performance of carbon black, there are "reinforcing carbon black" andConductive carbon black"Wear-resistant carbon black," etc. Can be used as black.dye, used for manufacturingChinese InkInk,Paintetc., also used for makingRubberreinforcing agent.

Working Principle:

The ZJ-C series graded impact mill utilizes hammers, blades, rods, and other components on a high-speed rotating rotor to impact the material being crushed. Through the intense impact between the material and the rotor, high-speed collisions among the rapidly flying material particles, as well as shear grinding between the rotor and the stator or side walls, it achieves the purpose of ultra-fine crushing of the material.

OilIndustry Application Advantages:

-> This equipment can be adjusted within any particle size range required by the petroleum coke industry, for example: D100=150 mesh, D100=180 mesh, D100=220 mesh, etc.

-> In response to the adhesive nature of petroleum coke powder, the structural design of the crushing main unit and classifier was optimized, effectively resolving the adhesion issue.

-> High yield, no large particles, concentrated particle size, and no over-grinding or over-fine phenomena. The output is more than 30% higher than similar models, especially in terms of controlling large particles.

-> The easily worn parts are treated with wear-resistant measures, resulting in a service life 5-6 times longer than similar models, while significantly reducing contamination from iron impurities.

-> The dust collector adopts offline ash cleaning technology and a waterproof membrane filter material design, significantly increasing the filtration area and reducing the adhesion of powder on the filter bags.

The feeding system adopts fully automated control, and the entire machine operates under a fully enclosed negative pressure environment, ensuring no dust pollution.

-> Production capacity exceeds 4-5 t/h

Features of the ZJ-C Series Equipment:

1. Suitable for ultra-fine grinding of materials with a Mohs hardness below 5.
2. The particle size range is finer than that of ordinary mechanical mills. It is equipped with a high-efficiency turbo classifier, which allows qualified fine powder to be discharged promptly after crushing, preventing over-grinding. This enables the production of products with a concentrated particle size distribution, with the fineness arbitrarily adjustable within the range of d97=10 to 74 μm.
3. Low energy consumption, high output, and higher energy efficiency ratio compared to traditional vertical mills, with a processing capacity of 4-5 t/h.
4. The crushing media do not come into contact with each other, resulting in minimal wear and high purity.
5. It has the function of dispersing and deagglomerating agglomerated materials.
6. Operates under full negative pressure, with low noise and no dust pollution on site.