Exterior wall putty
**Product Introduction:**
Product Features：
1This product is a new-generation replacement for traditional water-based exterior wall putty.
2Green and environmentally friendly, non-toxic, non-irritating, and pollution-free. Contains no harmful elements such as formaldehyde, benzene series, heavy metals, or ammonia.
3Single-component, ready for construction by simply mixing with cold water.
4Good viscosity and strong adhesion. Easy to apply, easy to sand, easy to coat, and gentle on the hands.
5It has stronger UV resistance, thermal insulation, energy-saving and emission-reduction properties, as well as crack resistance and anti-seepage performance compared to traditional exterior wall putty.
6Corrosion-resistant and weather-resistant, capable of withstanding various harsh climate changes without cracking.
7Applying paint to this putty allows for easy coloring and even color distribution, preventing issues such as peeling, blistering, cracking, or flaking of the paint layer.
Scope of Application：
Used for crack-resistant and waterproof plastering on exterior walls of buildings, such as mortar, concrete, and lightweight blocks; crack-resistant and waterproof plastering in damp areas like indoor bathrooms and basements; and renovation or decoration of smooth surfaces like old tiles, mosaics, and building ceilings.
Technical Indicators：
This product complies with the national standard for crack-resistant and anti-seepage exterior wall putty.JG/T157-2004middlePType standard.
Instructions for Use：
1. Press3Mix one part putty powder with one part water. Add the water to the powder, then stir thoroughly until it forms a putty paste (let it sit).8~10Stir again after a few minutes for better results), ensure there are no lumps in the paste before use. The prepared putty paste should be used within2～3hours.
2. The construction wall surface should be clean, solid, flat, and free of grease, wax, and other substances.
3. Apply in two coats. Allow the **first coat** to dry before applying the second coat, until the required thickness and flatness are achieved. The generally recommended thickness is1.5~2mm, the dosage is approximately1.5～2kg/m2。
4. After the putty has dried, use wet sandpaper to smooth out any scratches left during application.48After the putty has dried and hardened for more than an hour, you can apply the exterior wall paint.
Precautions:
The temperature is below5℃Construction should not be carried out when humidity exceeds 90%.
Shelf Life:
Unopened, shelf life of one year.
Supply method above: direct sales from the manufacturer.
