Basic Information:

CAS# :13463-67-7

Nature:

Particle size is very small: average particle size5 nanometers.

Good dispersion performance:5nm titanium dioxide has good dispersibility and can self-disperse in pure water without the need for stirring. The dispersed liquid can be sprayed onto furniture surfaces.、The wall forms a uniform nano-coating, which serves to purify indoor air.

High catalytic activity:The catalytic activity of 5-nanometer titanium dioxide has been tested and can capture and degrade harmful gases such as formaldehyde, benzene, and ammonia indoors, providing excellent odor removal performance.

Technical Indicators:

Usage method:把100gPowderDissolve into10kgIn purified water, distilled water, deionized water, etc., the solid content is made to beA 1% aqueous solution, spray directly onto walls and furniture.具surfaces, as well as the interior of automobiles, etc.

Precautions for Use:

1、Note: It is recommended to use a caliber ofUse an imported spray gun with a 0.5mm-1mm nozzle for application, ensuring uniform and consistent atomized spraying during the process.AvoidSagging and unevenness occur.

2、It is recommended not to spray on metal, stainless steel, and similar areas. Ensure proper protection before application.

3、During furniture construction, the main focus is on treating the rough surfaces, including the sides, back, interior, and bottom of the furniture.

4、It is recommended to use wallpaper.Spray at a concentration of 0.5% or lower, or do not spray at all.

5、Do not spray towards the human body. If it gets into the eyes, rinse thoroughly with running water.

6、When spraying, if the distance to the surface is too close, the spray liquid will run and leave marks; if the distance is too far, white spots may appear or adhesion may decrease. Therefore, the spraying distance should be adhered to according to the construction specifications.

7、UG05 After spraying the photocatalyst, clean the spraying equipment with clean water to prevent nozzle clogging and corrosion.

8、During construction, if the product solution is sprayed onto or flows onto surfaces that are not intended for spraying, wipe it clean promptly.

9、Spray in areas with moisture after thorough drying, then spray again after application.Do not allow the sprayed surface to come into contact with water within 2 hours.

10、Avoid construction in enclosed spaces, and ensure thorough ventilation after construction.

11、For a building area of 100㎡, it is recommended to use 100g of photocatalytic powder, with the specific dosage determined based on the extent of exceedance.。

12、During construction, protective equipment such as safety goggles, long-sleeved shirts and pants, masks, and gloves should be worn.

Packaging:100g/bag, 1kg/bag