- Products
-
Shops
AI Search
| ◆ High strength, high toughness | Its mechanical strength is close to that of high-purity zirconia microbeads, with impact resistance and no broken beads. |
| ◆Low wear | The wear resistance is close to that of high-purity zirconia ceramic microbeads, and it will not cause contamination to the ground material. |
| ◆ Moderate density | Its density is lower than that of high-purity zirconia but higher than that of ordinary 65 zirconia, making it widely applicable to various types of grinding and dispersion equipment. |
| ◆ Good liquidity | Good sphericity, no porosity, easy to clean, very smooth surface, and minimal wear on equipment. |
| ◆Good stability | Insoluble in any organic or inorganic corrosive liquids. |
| ◆Low usage cost | Excellent performance and relatively low prices will significantly reduce your operating costs. |
| ◆Wide range of applications | Suitable for all grinding conditions such as medium line speed, medium viscosity, pollution-free, and micro-nano scale. |
| YD-Zr80 Zirconium-Aluminum Composite Microbeads | |||
| Main technical indicators technical data | |||
| Chemical Composition Chemical Composition | Physical Properties Physical Properties | ||
| ZrO2:75～80% Al2O3:5～10% SiO2:7～12% Others: <1.0% | Density Density | ≧5.4g/cm3 | |
| Bulk density Bulk density | ≧3.3g/cm3 | ||
| Vickers hardness Vickers hardness | ＞1050 | ||
| Crushing Strength Compressive strength | ＞1.5KN(ф2mm) | ||
| Self-wear Self consumption | ＜20ppm | ||
| Specifications Standard Size（ф mm） | 0.60，0.80，1.00，1.20，1.50，1.80，2.00，2.20，2.50，3.00～10.0 (mm) Note: Can be customized for customers/Remark: can be customized for clients | ||
| Main Features characteristic）： | |||
| 1. High grinding efficiency, low cost; High efficient and low cost | |||
| 2. High strength and low wear. High strength and low wear rate | |||
