Fully automatic hardness measurement of granular products (granules/fine particles)!

Fully automated from sample collection/installation to measurement and cleaning.

· Images from a CCD camera can be used to record the process from pressure compression to crushing, and can simultaneously display the relationship between load and displacement.

It can magnify and display the particle fragmentation process in real time during measurement, and the data can be accessed and retrieved after measurement.

Japan Fresh Automatic Powder Hardness Tester BHT-1000

Standard

Measurement method

Constant speed loading method

Fracture load and displacement

The measured particle size range is 200-1500 μm (minimum display 10 μm).

Measurement item

, the descending speed can be selected from 0.1, 0.2, 0.4, 0.5 mm/sec

. Each sample contains a maximum of 300 particles.

Load cell

10.00N (minimum display 0.01N)*Load cell specifications can be modified

CCD camera

USB camera 744x480 350,000 pixels

Body dimensions

310 (W) x 390 (D) x 530 (H) mm*Includes adjuster and protrusions

Weight

About 30 kilograms

Power supply

AC100V 50/60Hz 3A

Utility

0.4MPa, dry air at a flow rate of 1L/min or above

Needle diameter: p2.0mm (tip surface treatment)

Other Specifications

Including an emergency stop button, the LED light illuminates during measurement, and a dust cover has been installed.