Experimental 0.3LNano Sand MillCharacteristics
...A highly recommended nanoscale experimental grinding equipment developed by our company.
...0.3LNano Sand MillIt is an ideal choice for screening formulas with a limited quantity of raw materials.
...capable of producing particles ranging from submicron to nanometer scale.
...self-circulating system with a built-in self-priming pump, reducing the cleaning process.
...Data obtained from laboratory nano sand mill tests can be directly scaled up for production.
...Experimental 0.3LNano Sand MillSmall footprint, flexible and convenient to move, with a stylish and imposing appearance.
...Variable speed stirrer, 0 to 5000 rpm. 0 to 18 ml.
...General-purpose, explosion-proof, and intrinsically safe electrical control.
...PLC diagnostics control operations and monitor the grinding process.
...Quick locking and opening mechanism saves time on assembly and disassembly, and is easy to clean.
...The grinding media capable of producing nanoscale materials can be selected within a range of 0.05 millimeters.
Experimental type 0.3L Nano Sand MillRoutine operations
...Before grinding, the sample can be pre-mixed or, after high-speed dispersion, poured into the feed hopper, and the material is then introduced into the nano bead mill while maintaining a low rotation speed.
...Adjust the frequency converter knob from low to high until the material can circulate and grind normally.
...The material will enter the grinding chamber from the product pump of the feed hopper and mix with the grinding beads. These grinding media can be made of glass, ceramic, or steel, with sizes ranging from 0.3mm to 3mm in diameter.
The rotation speed of the electronically controlled stirrer can be adjusted by turning the knob located at the upper end of the chamber to control the stirring speed, thereby determining the speed of the grinding chamber and the stirrer to manage product quality.
...Before starting work, please prepare the experimental 0.3L.Nano Sand MillConnect the cooling water to the grinding chamber, sealed housing, and front-end plate.
...Grinding and stirring can be operated separately.
...The flow rate of the material can adjust the end valve.
During cleaning, pour a solvent or other liquid compatible with the material into the funnel and grind 1 to 2 times.
...quick disassembly allows for cleaning within minutes.
Experimental 0.3LNano Sand MillElectrical Control Environment
...fully explosion-proof electrical control device.