The features of the Japanese KOKUSAN benchtop dispersion centrifuge H-40α for environmental analysis are as follows:

Ease of Operation

• Centrifugal force setting operationIt can operate with adjustable centrifugal force and also supports memory operation.。

• Multiple operating modesImplement step mode operation plus density gradient operation, with a total of 10 memory units.。

• Automatic identification sensorAutomatically read rotor conditions.。

• Self-diagnosis display functionEnsure safe usage through self-diagnostic display functions and alarm notifications.。

Performance Advantages

• Large-capacity processing**Processing capacity: 3,200ml (800ml x 4), also capable of handling 80 units of 15ml each.。

• High centrifugal force**The rotational speed can reach 15,000 rpm, and the centrifugal force can reach 16,110×g.。

• Multiple rotor options available.:Various rotors are available for selection, including rotor buckets for environmental analysis (supporting 3,000×g).。

• Acceleration and deceleration settings are flexible.There are 3 phases of acceleration, 3 phases of deceleration, plus natural deceleration.。

• Total Centrifugal Force Setting Operation FunctionFrom start to stop, convert the centrifugal force acting on the sample into a numerical value, so that even when using rotors with different radii, the same centrifugal effect can be achieved.。

• Centrifugal force setting operationCentrifugal force can be set for operation, and the operation settings can be memorized.。

• Multiple parameter settingsThe rotational speed and centrifugal force can be set in units of 10 rpm and 10×g, or 100 rpm and 100×g, respectively.。

• The timer function is powerful.The timer can switch between minutes and seconds, and can be set to a maximum of 999 minutes (or 999 seconds). During continuous operation (keeping it running), the elapsed time can be displayed.。

Safety and Reliability

• Safety DesignThe upper cover does not rotate when opened, and it cannot be opened during rotation.。

• Durable motorUsing a durable, carbon-free high-frequency motor.。

• Corrosion resistanceThe chamber is made of stainless steel (SUS304), which is corrosion-resistant and easy to wipe clean.。

Other Features

• Design is simple.The exterior design is simple, the control panel is intuitive, and it is easy to use.。

• Affordable priceWhile achieving high performance, it also achieves low cost.。

• Multiple rotor optionsFrom 15ml (φ16.5×105mm) × 72 tubes, 250ml × 4 tubes rack rotors to microplates, there are 12 types of rotors available for selection.。

• Biological hazard countermeasuresAs a countermeasure against biological hazards, there is a rotor that can be equipped with a protective cover (for acid-fast bacteria, 3,400×g).。

• Running by eyeEquipped with a self-balancing mechanism, it can operate based on visual estimation.。

• Good internal visibilityIt is clearly visible inside, confirming that the centrifugation is complete.。

• GLP and GMP Convenience: Conveniently allows for actual speed inspection.。

• Customization for Special SpecificationsSpecial specifications are available, and adapters, custom resin boxes, etc., can be made according to the intended use.。