Body transport dedicated pumpThe working principle of the pneumatic diaphragm pump, a specialized pump for powder conveying, adopts an efficient and energy-saving air circuit induction distribution valve technology, achieving the separation of the pump's motor air supply from the powder fluidization air circuit. This product can set the fluidization air pressure (2.5-6.2 bar) based on the differences in powder flowability. Powders with low bulk density and good flowability can be set with a lower fluidization air pressure, achieving energy savings while also reducing the load on the air release components.。

Transporting light, dry, and non-sticky industrial powders.The diaphragm specially designed for Ofer powder conveying is suitable for transporting lightweight, dry, and non-sticky industrial powders, such as carbon black, silica powder, silicone, resin, and pharmaceutical powders. To ensure efficient and safe conveying, it is recommended that the bulk density of the powder should not exceed 800.。

Application of Powder Diaphragm PumpsA powder diaphragm pump is a new type of conveying machinery capable of transporting various corrosive liquids, liquids containing particles, as well as high-viscosity, volatile, flammable, and highly toxic liquids. Diaphragm pumps are available in four materials: plastic, aluminum alloy, cast iron, and stainless steel. Depending on the liquid medium, powder diaphragm pumps use different materials such as nitrile rubber, neoprene rubber, fluoroelastomer, polytetrafluoroethylene, and polyhexafluoropropylene to meet various user needs. Installed in a variety of special applications, they are used to pump media that conventional pumps cannot handle, achieving satisfactory results.。

Pneumatic Dust Diaphragm PumpThe working principle of the pneumatic powder diaphragm pump is significantly different from that of a general pneumatic diaphragm pump. The main component of the pneumatic powder diaphragm pump is the distribution valve C, which is a double pilot valve that controls the distribution of fluidizing airflow and serves as the slave valve of the pump's main valve. The main air circuit control valve B is connected to the pump's main valve outlet D. Based on the pressure at these two ports, it can identify whether the pump's main valve is pressurizing the left or right air chamber, thereby controlling the introduction of powder fluidizing airflow into the powder chamber on the discharge side. This causes the powder in that chamber to enter a fluidized state and be discharged like a liquid.