LPG-250Battery materialsSpray drying
1, Feed liquid conditions
Material Name:Battery material slurry
Initial moisture content: 65～70%
Final water content:≤2%
Output: 100Kg/h
Feed liquid temperature:Room temperature
2, process conditions
Atomization method:Centrifugal typeFog droplets
Contact method with hot air:Co-current flow type
Heat source and heating method:Steam heating + electric heating compensation
Inlet air temperature: 220～350℃
Exhaust air temperature: 90～100℃
Product capture method:Main Tower + Cyclone + Bag FilterSystem
3Design Meteorological Conditions (Standards)
Atmospheric pressure: 101.3KPa
Ambient temperature: 20℃
Relative Humidity: 80%
4, utilities
Power supplyPower Supply: 380V3-phase, 5-wire, 50Hz
Power:Power 25kW
Water consumptionPressure: 0.2MPa
Usage: 200kg/min
The equipment occupies an area of approximately (length × width × height) m.Length × Width × Height 10×8×9.5

System Description
Initial selection: LPG-250Type spray drying unit
Air Filtration SystemHigh-efficiency air filters for primary, intermediate, and high-temperature applications, with differential pressure display.
Heating System:Steam heating + electric heating compensation
Medium Circulation System:Open-cycle operation of forced draft and induced draft fans
Feeding System:Adjustable Screw Pump
Automatic FeedingDust removal system:Bottom of tower + cyclone separation + bag filter
Control system:Human-Machine Interface + PLC Program Control