Aqueous viscous bacterial residue hollowPaddle DryerKJG-140

1. Dry 36 tons of sticky material with 65% moisture content to a material with 10% moisture content every 24 hours.

2. Is there a requirement for the average particle size of the output? It should not exceed 2cm, and the particle size must not be too fine (sand-like).

3. Before entering the dryer, the material is discharged from the plate and frame filter press in the form of cakes, with dimensions of 20cm*20cm, and has high viscosity (using a screw conveyor for feeding would compress it into sticky mud).

4. The drying equipment is simple and has a low failure rate.

5. The drying equipment produces a small amount of exhaust gas.

6. Two sets of drying equipment can be used in series.

7. The exhaust outlet temperature shall not exceed 100°C.

Characteristics of the Hollow Blade Dryer KJG-140 for Water-Containing Viscous Bacterial Residue:

The equipment has a compact structure, a large effective heat transfer area, and a small footprint.

Stir evenly, high thermal efficiency, good drying effect.

The blade shafts can intermesh with each other, providing a self-cleaning effect that prevents material from sticking to the walls.

Low energy consumption and low operating costs.

Low dust entrainment and minimal material loss

Indirect heating, does not contaminate the material.

Low rotational speed of the blade shaft, does not damage the shape or properties of the product.

The equipment offers high operational flexibility and runs smoothly and reliably.