Amoxicillin Dry Granulator LG-200

The material feeding method involves transferring the material in a sealed manner to the hopper of a dry granulator via a lifting feeding mechanism. The supplier must fully consider the compatibility of the lifting feeding device with the material, ensuring that the material enters the equipment hopper in a sealed state, maintaining smooth feeding, and preventing any adverse effects of the lifting feeding device on the material. The resulting dry granules are subjected to particle classification, and granules meeting the process requirements are discharged by gravity in a sealed manner into a transfer container.

Amoxicillin Dry Granulator LG-200Process Overview

The material feeding method for the demand side involves using a lifting feeding device to transfer materials in a sealed manner into the hopper of a dry granulator for dry granulation and particle sizing. It is required to perform particle classification on the dry granules, with a yield of granules between 20 mesh and 80 mesh in a single granulation process not less than 60%.

All materials that come into direct contact with materials, products, clean gases, etc., should be selected and used accordingly.AISI SS304Stainless steel, with the inner surface mirror-polished to Ra ≤ 0.6μm; non-metallic materials such as sealing rings, connecting pipes, and filters shall comply with medical-grade standards; the equipment frame and visible outer surfaces shall be made of AISI 304 stainless steel, with a matte finish on the outer surfaces. For the material requirements of each part of the equipment, the supplier shall provide relevant material certifications.