Iron Oxide Black Disc Continuous Dryer

Material Name: Iron Oxide Black;

Moisture content before drying: 15%;

Moisture content after drying: 1%;

Heat source: Steam after front-end desuperheating and pressure reduction

Steam pressure after pressure reduction and temperature reduction: 0.1 MPa - 0.4 MPa

Steam temperature after pressure and temperature reduction: 100℃-140℃

Output: approximately 2890 kg/h;

Evaporation capacity: 476 kg/h;

Characteristics and Applications of Iron Oxide Black Disc Continuous Dryer

Mechanical material conveying, continuous production, adjustable processing capacity, reduced labor intensity, improved working conditions, and convenient management.

High drying efficiency, with the overall heat transfer coefficient typically reaching 240-544 kJ/(m²·h·°C) and an average evaporation intensity of approximately 5-15 kg/(m²·h).

Vertical installation, complete insulation, high utilization rate of heat source and heat generation. The power required for this equipment is only about half of that of ordinary dryers, making it economical and feasible.

The exhaust gas emission speed is low, with minimal dust dispersion, meeting the requirements of the third-level emission standard. It improves the working environment and is particularly suitable for processing fine powder or granular materials, without the need for additional dust removal equipment.

The temperature of each heating plate layer is uniform.