1200L Lithium Battery Material Double-Cone Rotary Vacuum Dryer

Electric heating power: ≥81 kW (divided into two heating groups, with temperature control device)

Vacuum pump power: ≥4KW (with electrode-type pressure gauge device)

Main Parameters of Auxiliary Components:

Equipment components: The use of copper and zinc materials is strictly prohibited for complete set equipment components.

Material of thermal oil pump: cast steel

Oil temperature control method: adjustable, with protection devices, overload protection, and over-temperature protection functions.

The vacuum tank is connected using stainless steel corrugated flexible hoses, ensuring a tight seal and stable pressure retention, and is equipped with a vacuum cooling system.

Vacuum pump: Use products from reputable manufacturers (Shandong Dazhong Pump Industry or Changzhou Huadong), with tightly connected components and clamp-type installation.

Mold Temperature Controller Installation Method: Flange Connection Method.

Throttle control method: single throttle valve.

Working conditions: normal temperature and pressure, dust-sealed.

The overall machine noise is controlled below 65dB.

Filter material: Sintered stainless steel 316L mesh.

Electrical components: Use the "Schneider" brand.

The main unit and auxiliary components of the equipment are finely processed and aesthetically installed. There are no scratches, defects, stains, or other damages on the equipment parts or assembly areas.

The fastening parts of the equipment are tightly sealed, with no signs of loosening or detachment.

The machine's inlet and outlet are equipped with automatic positioning and connection functions to ensure a tight and secure seal.

Hopper volume: 2.0 m³. Material contact parts: 316L. The hopper must be equipped with a water-cooling jacket made of 304.

Material from 4 silos is conveyed horizontally for 15 meters and vertically for 15 meters to 2 silos with a capacity of 1500L each (receiving silos are provided by the buyer). The pipeline uses steel pipes lined with glass, and the elbows use steel pipes lined with ceramic. Vacuum conveying method is adopted. The control system is included.

Equipped with 4 infusion pumps (2 in use, 2 on standby; pump material lined with PTFE, head 15m, flow rate 20m³/h), to transfer the material liquid from 2 reactors to 4 centrifuges, including the control system; the infusion pipelines and valves shall be prepared by the buyer based on the site conditions.

The dual-cone main unit needs to be equipped with vibration damping facilities.

The entire system can be controlled both locally and remotely, and all data can be uploaded to the buyer's central control room.