Technical Data:

Basic data:

Working principle

The material enters the grinding chamber from the top via the feed pump and is evenly distributed as the rotor rotates. Under the action of eddy current centrifugal force within the gaps between the rotor and stator, the material undergoes thorough pre-dispersion treatment. In the subsequent intense grinding process, the rotor pins and stator continuously generate剧烈的撞击 changes on the grinding media, which in turn act on the material, enabling it to be ground. The ground material has an extremely short residence time in the grinding chamber, resulting in a very narrow particle size distribution range. Under the pressure of the feed pump and centrifugal force, due to differences in density, the grinding media return to the grinding chamber, while the material moves in the opposite direction of the centrifugal force, passing through a dynamic separator for filtration and separation, in a continuous循环往复 process.

Structural Design: The core design features imported wear-resistant steel rod pins installed on the rotor, with their quantity, volume, and installation positions optimized according to vortex fluid dynamics. This achieves **grinding ratio and grinding energy**, improving material grinding efficiency and enabling the material to reach a nanoscale fineness. As measured by a third-party Malvern laser particle size analyzer, the minimum fineness can reach ≤50nm.