Working Principle:

NORVA's High-Efficiency Submicron Horizontal Bead Mill utilizes advanced three-eccentric cam discs installed in a specific sequence on the stirring shaft. Under the action of the feed pump, the material enters the grinding chamber. The inlet is designed at the end of the drive connection flange, with the material flow direction opposite to the mechanical bearing at the bottom end, significantly reducing the pressure on the mechanical seal and extending its service life. During the high-speed rotation of the eccentric discs on the stirring shaft, the mixture of material and grinding media undergoes efficient relative motion, ensuring stable energy transfer without dead zones. As a result, the solid particles in the material are effectively dispersed and ground. After passing through a set of rotor gap separation filters, a final high-quality product with a narrow normal particle size distribution is obtained.

Structural DesignGerman cantilever three-eccentric cam disc design

Main Features:

*The fineness of material grinding can reach the submicron level, ≤0.7 μm.

*The reasonable grinding chamber design, featuring a German three-eccentric cam disc configuration, is the result of extensive experimental data and is arranged in a specific fluid dynamics sequence.

*The entire grinding chamber is subjected to radial forces, and the large-area three-eccentric cam disc generates high-density grinding energy, resulting in a uniform energy balance of the grinding media on the material.

*The work is convenient and flexible, easy to operate.

*Continuous high-energy grinding process

*Convenient replacement of grinding chamber spare parts for different materials.

*The optional fineness range of the grinding media is 0.1 - 3 mm.

*The high-efficiency dynamic separator is a

*High productivity. Efficiency is 5-10 times that of traditional sand mills of the same type.

grinding cylinder

Basic data: