Device Introduction:

NanomaterialsThe mixing and extrusion unit is designed based on the modular principle.Based on the organic combination of screw elements and intermeshing blocks with different leads and lengths,Add organic raw materials, fillers, and solid-liquid additives throughConveying, MixingMixingShearing, dispersion, homogenization, degassing and devolatilization,"Establishing pressure"Squeeze out, melt blendingThe material is extruded from the die.After，Enter the pelletizing system.Rotary knife cuts pellets, and the pellets are carried out of the pelletizing chamber by temperature-controlled water and enter a centrifugal dryer to remove moisture.，Obtain brand-new comprehensive performance.Nano-modificationMaterial.

Applicable raw materials:

Organic polymers, various powders (including nano-powders).

System Advantages:

1) The flexible clamping design of the pelletizer head and cutter head allows for cutter head replacement within 2 to 3 minutes, improving production efficiency.High, good stability;

2) Ultra-hard die head and blade materials ensure that the die head does not need to be replaced for two years, and the blade does not need to be replaced for one year.

3) Innovative electromagnetic heating and temperature control design for the die head ensures rapid heating and uniform heat distribution, effectively preventing material solidification in the mold plate.Dead hole phenomenon;

4) Pneumatic control, self-aligning cutting knife system;

5) One-touch startup, extremely convenient to operate.

Product Model and Parameters