Interior wall putty
Product Introduction:
Product Features：
1This product is a new-generation substitute for traditional water-based interior wall putty.
2Green and environmentally friendly, non-toxic, odorless, non-irritating, and pollution-free. Contains no harmful elements such as formaldehyde, benzene series, heavy metals, or ammonia.
3Single-component, can be applied directly by mixing with cold water.
4Strong adhesion, quick and convenient application, non-irritating to the skin, pleasant hand feel, slow drying, easy to polish, and easy to sand.
5After the putty has dried and set, it does not shed powder on either interior or exterior walls. It offers good strength, high hardness, a glossy surface, wear resistance, mold resistance, excellent waterproof performance, and scrub resistance.
Scope of Application:
Scraping surfaces such as indoor cement mortar, concrete, cement boards, thick wooden boards, gypsum boards, and metal panels.
Technical Indicators:
This product complies with the national standard for water-resistant interior wall putty.JG/T3049－1998ChineseNType standard.
Instructions for use:
1, according to3Mix one part putty powder with one part water. Add the water to the powder, then stir thoroughly until the mixture is smooth and free of lumps before use.
2The construction wall surface should be clean, solid, smooth, and free of grease, wax, and other substances.
3Apply in two separate coats. Wait for the first coat to dry before applying the second, until the required thickness and flatness are achieved. The generally recommended thickness is0.6~1.2mm, the dosage is approximately0.8~1.2kg/m2 。
4During paint application, the putty layer must be completely dry before painting. Generally, after applying the final coat of putty, it is necessary to24~48hour (25℃Only then can one take practical action.
Precautions:
The temperature is below5℃, construction is not suitable when humidity exceeds 90%.
Shelf life
Unopened, shelf life of one year.
