Scope of Application:
Magnetic bar separators are primarily used to remove ferromagnetic impurities from powdered, flaky, and granular raw materials. They are widely applicable in industries such as ceramics, electric power, mining, plastics, chemicals, rubber, pharmaceuticals, food, environmental protection, pigments, dyes, electronics, and metallurgy.

Working Principle:
The magnetic rod separator is a magnetic filter composed of magnetic filter rods (magnetic rods) made from high-quality stainless steel tubes and high-B-value rare earth alloy neodymium iron boron, using a special manufacturing method. These rods are fixed in a frame made of high-quality stainless steel plates. When iron-containing materials pass through, they are attracted by the magnetic rods, firmly adhering to the tube walls, ensuring the integrity of the equipment and the safety of the product.

Product Features:
Low energy consumption, pollution-free, easy to clean, no need for shutdown, and adopts an isolated iron removal method. The iron removal chamber is isolated from the finished product chamber, preventing iron powder from mixing into the finished product chamber during the iron removal process. The structure is simple, installation is convenient, and users can replace the demagnetization ring themselves, making it quick and easy.
Schematic diagram of the magnetic bar iron remover:
(Surface material: Stainless steel SUS304, base bracket made of angle iron)

Please provide the specific content you would like me to translate from Chinese to English, and I will proceed accordingly.
【CBC 12000 460×360×340 1400 6 ZF9-50 M 】
12000GS: Indicates the magnetic strength requirement for the magnetic rod; 12000GS means the surface magnetic field of the magnetic rod is 12000GS.
460×360×340: Indicates specific dimensions. The first set of numbers represents the length of the box, the middle set represents the width, and the last set represents the height. Customization is available according to customer requirements.
1400: Indicates that the total height of the iron remover is 1400mm, with the unit of measurement being millimeters. The total height and the vertical distance from the discharge port and slag outlet to the ground can be customized according to customer requirements.
1020: Indicates that the total length of the magnetic rod is 1020mm. Due to the special design of the semi-automatic iron remover, when the magnetic rod is pulled out from the pull ring, the iron slag on the magnetic rod will be scraped off by the rubber ring and then fall from the slag outlet. The magnetic part of the rod is 360mm. The calculation method for the total length of the magnetic rod is: (magnetic part + 100mm) × 2 + 100mm.
6: Indicates the number of layers of the semi-automatic iron remover, which can be customized according to customer requirements.
ZF9-50: Indicates the model of the attached vibrator. There are two types of models: ① ZF9-50, ② ZF18-50; if no vibrator is used, it is denoted by N. (The technical data of the vibrator is shown in the table below)
M: Indicates temperature resistance; refer to the magnetic rod schematic for detailed temperature resistance requirements.

Specifications of Magnetic Bar Iron Remover:
There are many specifications for magnetic bar iron separators, which are generally customized according to customer requirements. They can be operated manually, semi-automatically, or automatically, with a surface magnetic field strength of up to 12,000 GS.