Changzhou Haomai Drying Engineering Co., Ltd. warmly welcomes friends from home and abroad to visit, guide, and provide valuable advice!

Contact phone number:13706****** Manager Zhang

Sludge-specific DryerSuitable for drying tannery sludge, printing and dyeing sludge, domestic sludge, organic sludge, petrochemical sludge, activated sludge, and papermaking sludge.

JYG Series Sludge"Specifically for dry"DryerProduct Introduction

It can indirectly heat or cool paste-like, granular, powdery, or slurry materials, enabling unit operations such as drying, cooling, heating, sterilization, reaction, and low-temperature combustion. The specially designed wedge-shaped stirring heat transfer blades in the equipment offer high heat transfer efficiency and a self-cleaning function for the heat transfer surface.

JYG SeriesSludge-specific DryerEquipment Features

1. Compact structure, small footprint, fewer auxiliary equipment, saving investment and operating costs.

2. Using conduction heating method, the heat transfer area is large, heat loss is minimal, and the heat utilization rate can reach over 90%.

3. The wedge-shaped blades have self-cleaning capability, ensuring efficient heat transfer performance.

4. The dried sludge has uniform dryness and particle size.

5. The drying process offers high adjustability and is easy to operate and control.

6. The dried sludge contains high calorific value and organic components, making it a renewable resource with utilization value while meeting environmental protection requirements.

JYG SeriesSludge-specific DryerStructural Principle

The equipment adopts a conduction heating method, consisting of two intermeshing blade shafts, a W-shaped housing base with a sandwich layer, and a transmission part. The entire drying process of the sludge is carried out in a sealed state, where volatile organic compound odors and moisture are sent to the exhaust gas treatment device through an induced draft system in a closed environment, thereby avoiding environmental pollution. The heating medium is typically steam or thermal oil. The heating medium is divided into two paths, entering the dryer housing sandwich layer and the blade cavity respectively, simultaneously heating the machine cavity and the blade shaft, and drying the sludge through conduction heating. After the sludge enters the machine cavity, the rotation of the blades causes the sludge to flip and stir, continuously renewing the heating interface and fully contacting the heated body and blades, thereby evaporating a large amount of water from the sludge. At the same time, the sludge is transported toward the discharge outlet as the blade shaft rotates, and finally, the uniformly dried sludge is discharged from the outlet.

"Haomai Drying – Innovator of Technological Revolution" places great emphasis on talent and technological innovation, continuously collaborating with universities and design institutes to develop a series of drying equipment that boasts high efficiency, ease of operation, and advanced control. At the same time, it actively participates in the research of new processes and the development of new technologies for manufacturers in the pharmaceutical, chemical, and food industries, striving to provide customers with mature and satisfactory products. To ensure the feasibility of design solutions, the company also maintains a variety of test prototypes, allowing customers to conduct material testing and obtain practical data. Contact number:13706****** Manager Zhang