VOverview of the Mixer

I. Product Overview:

V-type mixerIt is a relatively common powder internationally.,Granular Material Mixer.It has a simple structure.,Easy to operate,Easy to maintain and clean.,Fast speed,Features such as excellent mixing effect..Widely adopted in:Magnetic materials,Powder Metallurgy,Pharmaceutical,Chemical industry,Food,Electronics,Ceramics and other industries,It is an ideal mixing device..

II.Working Principle:

This device is designed by incorporating the advantages of similar foreign products.,UsingMixerThe lengths of the two cylindrical tubes are not equal.,The formation is asymmetric.,When the mixer rotates, the material transitions from decomposition to combination.,From combination to decomposition,Due to differences in material planes,There is also lateral force.,It also drives the material to move laterally.Flow,Each rotation generates approximately [横向力] of lateral force.25%The material flows from one bucket to another.,This material is mixed both horizontally and radially.,Decomposition and combination are carried out alternately.,Achieve a highly uniform mixing effect of the materials..
III.Characteristics:
No mechanical extrusion or severe wear.,Can maintain the integrity of material particles.. Polish the inner and outer surfaces of the barrel.,All are designed with smooth transitions.,No blind spots,Avoid material cross-contamination.,The discharge port is equipped with a butterfly valve.,Easy to cut and feed materials..
This machine can also be equipped with a forced stirring device, material humidification system, and gas protection device according to user requirements.

IV. Basic Parameters:

V. Selection Assistance：

1. Model Description:V- (Volume) Example: V-20 refers to a V-type mixer with a volume of 20L.

2. Select the model volume based on the processing quantity each time.

3. Select the cylinder material or inner lining based on the properties of the material.

4. Select other functions based on process requirements;

VI. Precautions for Use：

1. The equipment must be installed on a flat and solid ground;

2.Before use, first add oil to the beard.LubricationAfter refueling, run it under no-load conditions to check whether all fasteners are loose, whether the electrical system is functioning properly, and whether the machinery is operating normally. If any abnormalities are found, carry out repairs and adjustments.；

3.The amount of material added must not exceed the specified volume (half of the total volume), and the equipment can only be started after the charging cover is securely fastened.

4.Always monitor the equipment's operation. If any abnormality is detected, the machine must be stopped immediately for inspection, and it may only be restarted after the fault has been resolved.

5. After work or when changing product types, clean the inside and outside of the equipment thoroughly.

7. Payment, Shipping, and Receipt：

Generally, payment is required before shipment, though payment can also be collected via logistics as specified in the contract. The shipping method and route primarily involve logistics delivering to the recipient's city for self-pickup, with door-to-door delivery available at an additional fee. Small items can be sent via courier, but the shipping cost will be more than double. Upon arrival, the logistics provider will notify the recipient by phone or text message using the contact information provided. When receiving the goods, inspect the packaging for integrity. If the packaging is damaged, causing product damage or loss, the logistics provider may be held liable. Please contact us promptly by phone in such cases.

8.Quality Assurance and Service：

This product is covered by a three-guarantee quality policy, with a one-year warranty period, excluding damage caused by human factors or abnormal use. In the event of equipment malfunction, please contact us promptly by phone and provide a description of the cause of the issue.